How to replace the graphite copper?

In the 1960s, as a copper electrode materials are widely used, the utilization rate of about 90%, graphite, only about 10%; the 21st century, more and more users began to choose as a graphite electrode materials in Europe, more than 90% The graphite electrode materials. Copper, which had been dominant electrode materials, graphite electrodes and its advantages compared to almost disappear. What led to this dramatic change? Of course, is that a lot of advantages Graphite electrodes.
...

Graphite, the "flying" out of diamond

Diamond filed, people will think of the dazzling, flashing bright scenes, as the owner of the dazzling activities. But its expensive price, most people can only be discouraged. Nevertheless, people still long for the diamond. You know the diamond is? It is the chemical composition of carbon (C), natural diamonds by the diamond after pondering before described as "diamonds." Natural diamonds are very rare in the world is greater than the weight of 1000 kt (1 gram = 5 carats) of diamonds, only 2, more than 400 karats of diamonds, only more tablets, so far China's biggest diamond found in heavy 158.786 kt, which "Chang Lin Diamond." Scarcity, because to do, "Diamond" natural diamond is rare, people wanted to "artificial" diamond to replace it, and this naturally thought of Diamond's "twin" brother - the graphite.
...

Carbon and that the classification of products

First, carbon and graphite products
(A) of the type of graphite electrodes
Mainly petroleum coke and needle coke as raw materials, coal for asphalt binder, calcination, the ingredients, mixed pinch, pressure-type, roasting, graphite, machine processing and made in the electric arc furnace in the form of electric arc furnace charge for the release of energy For the melting heat conductor, according to the quality of their high or low, can be divided into ordinary power, high-power and ultra-high power. Graphite electrodes are:
...

New use of graphite

With the scientific and technological development, people of graphite also developed a number of new uses.
Flexible graphite products. Flexible Graphite, also known as expanded graphite, is the development of a new era of graphite products.
...

Carbon The names of sources

: from the Greek "graphein", meaning "to write." By the German chemist and mineralogist AG Werner named in 1789;
Chemical composition: pure ingredients are very few, often with a variety of impurities;
...

Graphite industrial use

Graphite used in a wide range of industries, will be used in almost every industry. On the industrial use of the artificial graphite, which is special GRAPHITE. According to their shape the way there are several types.
...

Carbon

Carbon and graphite materials based on carbon-based solid non-metallic materials, which are basically non-carbon graphite material composed of carbon, graphite and the material is essentially composed of carbon graphite material. For the sake of simplicity, sometimes the carbon and graphite materials collectively known as the carbon material (or carbon material).
...

Industrial Classification of natural graphite

1. Dense crystalline graphite
Dense crystalline graphite block, also known as graphite. Such graphite crystal clear crystals visible to the naked eye. Particles larger than 0.1 mm in diameter, surface area on the scope of the 0.1-1m2 / g (F-Sorb 2400 Miriam BET surface area method of testing), arranged in crystal chaotic, massive structure was dense. This: The graphite is characterized by high grade, generally for the carbon content of 60 to 65 percent, sometimes up to 80 ~ 98%, but the creamy and plasticity of graphite flake as well. Graphite surface area is a very important study, graphite surface area of the test data is only detected by BET using the results are real and reliable, there are a lot of domestic equipment can only do a direct comparison method of detection, are also being eliminated. At present, domestic and specific surface area test unified multi-point BET method, at home and abroad to develop specific surface area measured by the standard testing methods are based on BET-based, reference is made to our national standards (GB / T 19587-2004) - gas adsorption BET principle Determination of solid material surface area. Detection of specific surface area is relatively time-consuming work, as the absorption capacity of the sample, some of the test samples may need to spend a full day, if the test did not achieve a fully automated process, and that testers can not leave on time and to A high degree of concentration, observation instrument panel, the control knob, a little inattentive when the testing process will lead to the failure of this test would be a waste of a lot of staff time. Real fully automated intelligent surface area product testing, test equipment industry will be in line with international standards, similar international products are all fully automated and manual equipment abroad have been eliminated. Real fully automated intelligent surface area analyzer, the test will be repeated from the mechanical operation of liberating greatly reduced the intensity of their work, simple training to improve work efficiency. Real fully automated intelligent meter surface area, greatly reducing the human error led to the operation, improve the accuracy of the test. F-Sorb 2400 surface area than the real test is to achieve BET method of detection equipment (both direct contrast) and, more importantly, F-Sorb 2400 test surface area is so far the only fully automated intelligent than the surface area of detection Equipment, the test results with the international high consistency, stability is also very good at the same time to reduce human error and improve the accuracy of test results.
...

graphite

Graphite carbon element is the crystallization of minerals, and its crystal framework for the layered hexagonal structure. Each network layer between the distance of 3.40, the same network layer of carbon atoms in the pitch for 1.42A. A six-crystal system, complete with layered cleavage. Cleavage face key elements to focus on the weak molecular attractive, so Natural floatability of its very good.
...

Beijing Sanye Carbon Co

Beijing Sanye Carbon Co.,Ltd£¬which  was founded in 1986, has  insisted on conducting  strict  quality control and promoting a continuous progress  of  technology. We devoted great effort to developing new products and materials. And now we have become one of the top companies in the field of carbon and graphite precision machining.

...
分页:[«]1[»]

日历

<< 2008-12 >>

Sun

Mon

Tue

Wed

Thu

Fri

Sat

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

控制面板

网站分类

最新评论及回复

最近留言

最近引用

文章归档

Search

站点统计

  • 文章总数:10
  • 评论总数:0
  • 引用总数:0
  • 浏览总数:0
  • 留言总数:0
  • 当前主题:Default主题
  • 当前样式:default

网站收藏

友情链接

图标汇集

    1, three carbon industry for its excellent technical level and strong production capacity, to produce first-rate products. 2, three carbon industry, urgently-needed and timely feedback to deal with, you make more money. 3, three carbon have a stable and extensive sales network, to guarantee the first time to meet customer demand. 4, three carbon industry at home and abroad over the years advanced the friendly and cooperative enterprises in the industry leading position